2000

Product Photo

Other KLINGERŪtop-graph Products

Please Select KLINGERŪtop-graph
Product to View.

2000   
2008   

Gasket Installation Guide

Download Klinger Gasket
Installation Instructions
(PDF 431KB)

Please Note: you will require Adobe Acrobat Reader to View Gasket Installation Instructions, Approvals and Technical Data Sheets - Click Here to Download Acrobat Reader.

Characteristics & Main Applications
The really flexible graphite sealing material with a high degree of inherent stability offers reliability in handling. Thanks to its high load bearing capacity and the low embrittlement, KLINGER top-graph-2000 is ideally suited for use with steam and other sophisticated applications. The material impresses with its good handling in combination with its very high level of load bearing capacity and minimal embrittlement at temperatures up to 300°C. These properties offer the gasket a high degree of resistance to damage during fitting and under operation, prevents the loss of bolt load and the formation of cracks at high temperature. The material is suitable for use with steam up to 300°C. In many other areas of application, temperatures of over 500°C are possible. KLINGER top-graph-2000 combines the advantages of fibre reinforced gaskets preferred by the experts with the key features of really flexible graphite.

Material
Sealing material, based on graphite and synthetic fibres. Manufactured using a revolutionary process which provides the graphite gaskets with totally new, previously unachievable properties. KLINGERŪtop-graph is also known as topgraph or top graph.

pT Diagram

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid. &nbsp

1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.

Click to Download Technical Data Sheet
Click to Download MSDS (Material Safety Data Sheet)

Dimensions of the Standard Sheets
Sizes: 1000 x 1500 mm, 1500 x 2000 mm Thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm; other thicknesses and sizes on request. Tolerances: thickness ą 10%, length ą 50 mm, width ą 50mm

Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture's control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.


BAM certificate - Download PDF
KTW proposal - Download PDF
DIN-DVGW certificate - Download PDF
TA-Luft (Clean Air) certificate acc. VDI 2440 - Download PDF
Germanischer Lloyd certificate - Download PDF